Forech Impact Bars are designed to absorb impact at the loading points of Conveyor Belts, where a combination of high energy absorption and low friction is needed.
Due to ease of installation, these Impact Bars replace the conventional idler sets. The top cover is made of an Ultra High Molecular Weight Polyethelene, which gives these Impact Bars a very low friction top surface. The middle portion is of a high quality energy absorbing rubber, which acts as a shock absorber at the loading zones of conveyor installation. These Impact Bars are also available with tapered ends on one side or on both sides to prevent any damage to the conveyor belt.
Forech Impact Bars come with a ‘T-Track’ fastening system, which enables variable fixing points throughout the length of the Bars. A ‘T-Track’ fastening system also makes the element adaptable to any cradle arrangement, which the conveyor installation might have.
The Impact Bars come in standard lengths of 1220mm, 1500mm and 1524mm, with top cover of UHMWPE and are supplied with 8 bolts and Nylock Nuts as a standard accessory.
Special sizes of Impact Bars are also manufactured on special requests.
The weight of the material can cause deflection or sagging between the roller sets at the conveyor feed point. The impact bars are used to prevent damage to the belt at the loading points, to keep the belt stable and to avoid the spillage of the conveyed material.
- Easy installation
- High impact and bending strength
- Sliding belt guidance
- Abrasion resistant
- No moving parts, no lubrication ; hence zero maintenance.
- No belt sagging, no belt mistracking.
- Protect belt from tear and puncture.
- Reduces spillage.
- Extremely low coefficient of friction.
Colour (UHMWPE): red/blue
|Belt Width (mm)||Number of Bars|